Wednesday, March 4, 2009

Media

The way on which data travels from Source Computer to the Destination Computer is called Media OR the object which makes a link between Sender and Receiver.
Types of Media
1: Guided Media (Bounded Media)
2: Unguided Media (Unbounded Media)
1: Guided Media: (Cables)
We have three types of Guided Media
1 Coaxial Cable
2 Twisted Pair Cable
3 Fiber Optic Cable
Coaxial CableThere are two types of Coaxial Cable
Thin net Coaxial Cable
Thick net Coaxial CableThin net Coaxial (10 base 2)
1 It is used in base band transmission
2 It can flow the data up to 185 to 200 Meter
3 We use this type cable in Bus Topology and Ring Topology
4 It has a speed of 10 Mbps (Mega bit per second)
5 The connector for this cable is called BNC (British Naval Connector)
Thick net Coaxial (10 base 5)
1 It is used in base band transmission.
2 It can flow the data up to 500 meter.
3 It is used in Bus and Ring Topology.
4 It has a speed of 10 Mbps
5 The connector for this cable is called AUI (Attachment Unit Interface)
Twisted Pair Cable STP (Shielded Twisted Pair Cable)
UTP (Unshielded Twisted Pair Cable)
There are six Categories available in Twisted Pair Cable
RJ: Registered Jack
Making of Twisted Pair Cable
We make Twisted Pair Cable in three different ways for Network
1: Cross Cable
2: Straight Cable
3: Roll Over Cable
Cross Cable is used to connect two same devices like Computer to Computer, hub to Hub or Switch to Switch.
Straight Cable this type of cable is used to connect different devices .It is also used in Star topology. It is used to connect Computer to Hub, Computer to Switch or switch to Router (MAN or WAN)
Roll Over Cable this type of cable is used to only and only connect Computer to Router; we connect system to Router in order to configuration the Router by the help of IOS (Internet work Operating System).
We have two Standards to make the above three Cables. 568A and 568B
Cross Cable
568A _________________568B
Straight Cable
568A ___________________568A
568B ___________________ 568B
Roll Over Cable
568A ____________________ 568 A-1
Fiber Optic Cable It is used in LAN, MAN, WAN.The speed of this cable is up to 2000 Mbps.It can Flow the Data up to 10 KM.In the cable instead of conductor there is glass or plastic covered by Fibers.Data flows in the form of Light.Light is encoding in digital signals.It is used in base band transmission.The connector for this cable is called Fiber Clip.

No comments:

Post a Comment